Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It is discreet, does not use LED indicators or key fobs, and is concealed in the wiring of your vehicle.
The user can also disable the system temporarily by using Transport Mode when renting out their vehicle. This guide will guide you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning, and relay attacks. The system is linked directly to the ECU of your car and protected by a pin code you select. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It is not able to be disabled by cutting circuits.
The system is simple to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's protection package.
To avoid an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. After this is completed the installer is now able to begin work. Hand tools are essential for securing connections with precision and a multimeter can be used to verify electrical values and safety. Cable ties and insulation tape are also essential for protecting connections and keeping wiring neat. The Ghost Immobiliser user's manual will provide specific guidelines specifically tailored to your specific model.
During the installation, it is essential to choose the right grounding location that is free of any paint or debris. Installers must also ensure that the immobiliser's wires, CAN H and CAN L are connected to the appropriate ECU ports. The wires can be plugged into or soldered based on the model. Using a high-quality connector is recommended to ensure a durable and secure connection.
Once the install is complete After the installation is complete, the customer can turn on the Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times in 2 seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a smart option for anyone who regularly rents out their cars on platforms like Turo. An immobiliser can cut down on the cost of insurance, as it decreases the likelihood of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser for those who want to safeguard your vehicle from theft. The device protects your vehicle from starting even if a criminal steals or copies the key. This is due to its high-tech technology that is designed to prevent the engine from starting without the correct PIN code is entered.
The device is connected to the vehicle's bus system CAN, allowing direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the best way to safeguard your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing a Ghost immobiliser is easy however, you must follow the instructions to avoid electrical problems and malfunctions in the system. First, you must find and locate a permanent 12V power source and an appropriate grounding point on the chassis of your vehicle. Then, you can begin connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a strong connection. Connect the connections with heat shrink tubing, insulation tape or other materials to prevent short circuits of electricity.
After the wires have been connected, you can connect the battery and then turn on the engine to test the immobiliser's function. After you've confirmed that everything is working properly and you are satisfied, you can place the immobiliser in a secure position inside the vehicle. Be sure to cover it properly to stop thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it's a top-quality deterrent to car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. It is also simple to use and can be put into the service valet mode to ensure that your car is not activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It communicates with your vehicle's ECU and connects directly to the CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings, unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. The system does not send or receive radio frequency signals, but instead uses CAN data for communication with your ECU. It doesn't even require any modifications to your existing key fobs.
Enter your sequence for disarming (either two or one buttons) and then switch on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your car and drive away safely.
Once installed The Ghost Immobiliser can safeguard your vehicle from key cloning and hacking while preserving the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you have to hand your vehicle to service or valet parking.
To complete ghost immobiliser near me , you'll have to find the source of power that is constant (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested to secure the wires. This reduces the possibility of theft by thieves. Make sure you verify the locations of these points to avoid making mistakes and mark them with an adhesive or label. Verify every connection for signs that they're getting worn out. Connectors that are loose could cause malfunctions in the system, so make certain that they are securely fixed and well-insulated. Don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit functions properly and that all connections and insulation are secure. If you encounter any issues, make sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your car's ECU to stop the engine from starting without authorization. The innovative technology it uses protects your car against key cloning, hacking, and other typical tactics thieves employ to steal cars. The Ghost is a perfect complement to existing tracking and alarm systems to provide the most effective protection for your vehicle. The Ghost's unique features, combined with its secluded design makes it a sought-after option for both car enthusiasts and security conscious drivers.
It is important to follow the steps of installation in order to ensure complete integration of the Ghost Immobiliser. Refer to the wiring diagram of your vehicle to assist you in locating and connecting the wires. The next step is to determine the power source and grounding points. Once you've found them, you will be required to mark the points to make them easy to locate during installation. Finally, it's essential to use high-quality tools and materials. Basic hand tools can assist you in making precise connections. A multimeter can verify electrical values and guarantee safety. Cable tie and insulation tape will keep all connections neat. Additionally, a user's manual will give specific guidelines specific to your Ghost model.
It is essential to test the system prior to installing it. Enter the PIN code into the system and then start the vehicle. This test will verify that the immobiliser functions as intended and prevent unauthorised vehicle starts. This step should be done regularly as part of your routine inspections of the vehicle to ensure that the system is working properly.
Once the installation has been completed, you can start driving your vehicle with confidence. The Ghost will keep your precious possessions safe from potential thieves, ensuring that nobody can drive off with your vehicle without the correct PIN code. Learn Additional can be used in conjunction with an approved Thatcham tracker that detects any attempts at theft or tampering. This allows you to track your car in the event that it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from most major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to find out more about our services and installation options. We are a TASSA Registered installer, a certification that guarantees that we follow strict standards and procedures for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that all installations are carried out safely and correctly.